Keywords:
top of page
61_edited_edited_edited.jpg
60.jpg
3_1_1.jpg

Thermal control, which includes checking products and materials for flammability, fire resistance

Thermal control involves testing for resistance to fire, flammability, thermal conductivity, and spark resistance. Test methods are standardized by the relevant regulatory documents and depend on the scope of the test samples. All studies are carried out using special equipment.

Testing and certification center "Yugtest" offers its services in conducting thermal monitoring of products from various materials, both in Dnepropetrovsk and in any other city of Ukraine.

The main types of tests include
25.jpg

Fire resistance

According to modern requirements, tests for resistance to fire can be carried out not only in standard temperature conditions, but also in alternative modes. These include the regime of an external fire, a slowly developing fire, the temperature of the hydrocarbon regime

24.jpg

Thermal conductivity

Thermal conductivity tests show how well the material conducts heat. For testing, equipment is used that allows you to create a stationary heat flow passing through a flat sample with a certain thickness, directed perpendicular to its frontal part. In this case, the thickness of the sample, the temperature of its return faces, and the heat flux density are measured.

27.jpg

Flammability

Flammability tests are carried out using special equipment to determine the burning rate of samples located vertically or horizontally. Testing facilities vary depending on the type of test materials, products

26.jpg

Spark resistance

Testing for spark resistance involves exposure to samples (materials or products) over a period of time by a continuous series of sparks that do not pass into an arc. For this purpose, special equipment is used with a step-up transformer and additional resistance (active or reactive), which allows to provide a spark discharge shape

bottom of page